EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 16 (2025) EPJ Photovolt., 16 (2025) 9 References
Issue
EPJ Photovolt.
Volume 16, 2025
Special Issue on ‘EU PVSEC 2024: State of the Art and Developments in Photovoltaics’, edited by Robert Kenny and Gabriele Eder
Article Number 9
Number of page(s) 11
DOI https://doi.org/10.1051/epjpv/2024052
Published online 09 January 2025
  1. H. Wirth, K.-A. Weiß, C. Wiesmeier, Photovoltaic Modules (De Gruyter, 2016) [Google Scholar]
  2. H. Shin, E. Han, N. Park, D. Kim, Thermal residual stress analysis of soldering and lamination processes for fabrication of crystalline silicon photovoltaic modules, Energies 11, 3256 (2018). https://www.doi.org/10.3390/en11123256 [CrossRef] [Google Scholar]
  3. A.J. Beinert, P. Romer, M. Heinrich, J. Aktaa, H. Neuhaus, Thermomechanical design rules for photovoltaic modules, Prog. Photovolt. 31, 1181 (2023) [CrossRef] [Google Scholar]
  4. M. Hertl, D. Weidmann, J.-C. Lecomte, Microelectronics and Packaging Conference, 2009 (EMPC 2009) (European, 2009) [Google Scholar]
  5. T. Dullweber, L. Tous, Silicon Solar Cell Metallization and Module Technology (Institution of Engineering and Technology, 2021) [Google Scholar]
  6. A. de Rose, C. Rosado Alberdi, A. Kraft, Influence of IR Soldering Profile on Industrial Silicon Heterojunction Solar Cells, in WCPEC-8 (2022). https://www.doi.org/10.4229/WCPEC-82022-3CO.4.3 [Google Scholar]
  7. S. Wiese, F. Kraemer, N. Betzl, D. Wald, Interconnection technologies for photovoltaic modules − analysis of technological and mechanical problems, in 2010 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE) (Bordeaux, France, 2010), p. 1 [Google Scholar]
  8. Z. Wang et al., Use finite element modelling to characterise the stress evolution in Multi Busbar interconnected half-cell tiled modules after soldering and lamination, Sol. Energy Mater. Sol. Cells 252, 112166 (2023). https://www.doi.org/10.1016/j.solmat.2022.112166 [CrossRef] [Google Scholar]
  9. L.C. Rendler, A. Kraft, C. Ebert, S. Wiese, U. Eitner, Investigation of Thermomechanical Stress in Solar Cells with Multi Busbar Interconnection by Finite Element Modeling, in EU PVSEC 2016 (2016). https://www.doi.org/10.4229/EUPVSEC20162016-1CO.11.2 [Google Scholar]
  10. B. Illés, O. Krammer, A. Géczy, Infrared Reflow Soldering (Elsevier, 2020) [Google Scholar]
  11. C.L. Wyatt, Blackbody radiation, Radiometric Calibration: Theory and Methods (Elsevier, 1978), p. 29 [Google Scholar]
  12. J.R. Howell, M.P. Menguc, R. Siegel, Thermal Radiation Heat Transfer (CRC Press, 2010) [CrossRef] [Google Scholar]
  13. B.E. Yoldas, T. O'Keefe, Deposition of optically transparent IR reflective coatings on glass, Appl. Optics 23, 3638 (1984). https://www.doi.org/10.1364/AO.23.003638 [CrossRef] [Google Scholar]
  14. R. Strauss, SMT Soldering Handbook (Elsevier Science & Technology Books, Jordan Hill, 2020) [Google Scholar]
  15. A. Jamnia, Practical Guide to the Packaging of Electronics: Thermal and Mechanical Design and Analysis, 2nd edn (CRC Press, Boca Raton, 2009) [Google Scholar]
  16. J.P. Joule, XXXVIII. On the heat evolved by metallic conductors of electricity, and in the cells of a battery during electrolysis, Dublin Philos. Mag. J. Sci. 19, 260 (1841). https://www.doi.org/10.1080/14786444108650416 [Google Scholar]
  17. Short Wave Quartz Emitters, https://freek-heaters.com/products/infrared-heaters/short-wave-quartz-emitters/ (accessed June 20, 2024) [Google Scholar]
  18. Y.S. Touloukian, D.P. DeWitt, Thermophysical Properties of Matter − The TPRC Data Series, (IFI/Plenum, New York, 1970), Vol. 7 [Google Scholar]
  19. M. Zhao, Z. Zhou, M. Zhong, J. Tan, Y. Lian, X. Liu, Thermal shock behavior of fine grained W-Y2O3 materials fabricated via two different manufacturing technologies, J. Nucl. Mater. 470, 236 (2016). https://www.doi.org/10.1016/j.jnucmat.2015.12.042 [CrossRef] [Google Scholar]
  20. F. Hu, S. Lucyszyn, Modelling miniature incandescent light bulbs for thermal infrared ‘THz Torch’ applications, J. Infrared Milli Terahz Waves 36, 350 (2015). https://www.doi.org/10.1007/s10762-014-0130-8 [CrossRef] [Google Scholar]
  21. M. Virág, J. Murin, Thermal field simulation of a tungsten filament lamp referring to its lifetime, J. Electr. Eng. 56, 252 (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.