EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 16 (2025) EPJ Photovolt., 16 (2025) 6 References
Issue
EPJ Photovolt.
Volume 16, 2025
Special Issue on ‘EU PVSEC 2024: State of the Art and Developments in Photovoltaics’, edited by Robert Kenny and Gabriele Eder
Article Number 6
Number of page(s) 13
DOI https://doi.org/10.1051/epjpv/2024043
Published online 08 January 2025
  1. J. Schmidt, R. Peibst, R. Brendel, Surface passivation of crystalline silicon solar cells: present and future, Sol. Energy Mater. Sol. Cells 187, 39 (2018). https://doi.org/10.1016/j.solmat.2018.06.047 [CrossRef] [Google Scholar]
  2. M. Hermle, F. Feldmann, M. Bivour, J.C. Goldschmidt, S.W. Glunz, Passivating contacts and tandem concepts: Approaches for the highest silicon-based solar cell efficiencies, Appl. Phys. Rev. 7, 21305 (2020). https://doi.org/10.1063/1.5139202 [CrossRef] [Google Scholar]
  3. ITRPV, International Technology Roadmap for Photovoltaics (ITRPV): Results 2022, 14th edn. (2023) [Google Scholar]
  4. S.W. Glunz, B. Steinhauser, J.-I. Polzin, C. Luderer, B. Grübel, T. Niewelt, A.M.O.M. Okasha, M. Bories, H. Nagel, K. Krieg, F. Feldmann, A. Richter, M. Bivour, M. Hermle, Silicon‐based passivating contacts: the TOPCon route, Prog. Photovolt.: Res. Appl. 31, 341 (2023). https://doi.org/10.1002/pip.3522 [Google Scholar]
  5. E. Bellini, Jolywood claims 26.7% efficiency for n-type TOPCon solar cell, PV Magazine, 2023. https://www.pv-magazine.com/2023/04/12/jolywood-claims-26-7-efficiency-for-n-type-topcon-solar-cell/#:∼:text=The%20China%20Academy%20of%20Metrology,rating%20for%20a%20similar%20cell. (accessed 26 April 2024) [Google Scholar]
  6. F. Feldmann, B. Steinhauser, T. Pernau, H. Nagel, T. Fellmeth, S. Mack, D. Ourinson, E. Lohmüller, J. Polzin, A. Moldovan, M. Bivour, F. Clement, J. Rentsch, M. Hermle, S. Glunz, Industrial TOPCon solar cells realized by a PECVD tube process, in Proc. of the 37th European Photovoltaic Conference (EUPVSEC) (Virtual Conference, 2020) [Google Scholar]
  7. B. Hoex, J. Schmidt, R. Bock, P.P. Altermatt, M.C.M. van de Sanden, W.M.M. Kessels, Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O3, Appl. Phys. Lett. 91, 112107 (2007). https://doi.org/10.1063/1.2784168 [CrossRef] [Google Scholar]
  8. A. Richter, M. Hermle, S.W. Glunz, Reassessment of the limiting efficiency for crystalline silicon solar cells, IEEE J. Photovoltaics 3, 1184 (2013). https://doi.org/10.1109/JPHOTOV.2013.2270351 [CrossRef] [Google Scholar]
  9. S. Tepner, A. Lorenz, Printing technologies for silicon solar cell metallization: a comprehensive review, Prog. Photovolt.: Res. Appl. 31, 557 (2023). https://doi.org/10.1002/pip.3674 [CrossRef] [Google Scholar]
  10. A. Lorenz, M. Linse, H. Frintrup, M. Jeitler, A. Mette, M. Lehner, R. Greutmann, H. Brocker, M. König, D. Erath, F. Clement, Screen printed thick film metallization of silicon solar cells − recent developments and future perspectives, in Proc. of the 35th Photovoltaic Solar Energy Conference (EUPVSEC) (Brussels, Belgium, 2018), pp. 819–824 [Google Scholar]
  11. J. Schube, M. Jahn, S. Pingel, A. de Rose, A. Lorenz, R. Keding, F. Clement, FlexTrail printing as direct metallization with low silver consumption for silicon heterojunction solar cells: evaluation of solar cell and module performance, Energy Techol. 10, 2200702 (2022). https://doi.org/10.1002/ente.202200702 [Google Scholar]
  12. J. Schube, M. Klawitter, M. Linse, J. Schleuniger, I. Kegel, S. Toguem Fokoua, D. Gurovich, S. Melamed, F. de La Vega, M. Mäser, O. Mürdter, L. Englisch, F. Clement, A. Lorenz, High-throughput indirect gravure printing applied to low-temperature metallization of silicon-based high-efficiency solar cells, Energy Technol. 12, 2400066 (2024) [Google Scholar]
  13. M. Pospischil, M. Kuchler, M. Klawitter, I. Lacmago Lontchi, S. Tepner, R. Efinger, M. Linse, D. Witt, S.Gutscher, A. Brand, M. König, L. Wende, F. Clement, D. Biro, High Speed Dispensing − A High-Troughput Metallization Technology for >21% PERC Type Solar Cells, in Proc. of the 32nd Photovoltaic Solar Energy Conference (EUPVSEC) (Munich, Germany, 2016), pp. 403–406 [Google Scholar]
  14. S. Pordan, M. Mosig, F. Heitmann, M. Palme, N. Heuser, M. Weil, R. Steffens, O. Zuaiter, M. Kuchler, M. Pospischil, Optimizing solar cell metallization by parallel dispensing, Sol. Energy Mater. Sol. Cells 266, 112685 (2024). https://doi.org/10.1016/j.solmat.2023.112685 [CrossRef] [Google Scholar]
  15. J. Specht, K. Zengerle, M. Pospischil, D. Erath, J. Haunschild, F. Clement, D. Biro, High aspect ratio front contacts by single step dispensing of metal pastes, in Proc. of the 25th Photovoltaic Solar Energy Conference (EUPVSEC) (Valencia, Spain, 2010), pp. 1867–1870 [Google Scholar]
  16. M. Pospischil, M. Klawitter, M. Kuchler, J. Specht, H. Gentischer, R. Efinger, C. Kroner, M. Luegmair, M. König, M. Hörteis, C. Mohr, L. Wende, J. Lossen, M. Weiß, O. Doll, I. Koehler, R. Zengerle, F. Clement, D. Biro, Process development for a high-throughput fine line metallization approach based on dispensing technology, Energy Procedia 43, 111 (2013). https://doi.org/10.1016/j.egypro.2014.02.001 [CrossRef] [Google Scholar]
  17. M. Pospischil, T. Riebe, A. Jimenez, M. Kuchler, S. Tepner, T. Geipel, D. Ourinson, T. Fellmeth, M. Breitenbücher, T. Buck, M. Dhamrin, F. Clement, Applications of parallel dispensing in PV metallization, AIP Conf. Proc. 2156, 20005 (2019) [Google Scholar]
  18. M. Pospischil, M. Kuchler, M. Klawitter, C. Rodríguez, M. Padilla, R. Efinger, M. Linse, A. Padilla, H. Gentischer, M. König, M. Hörteis, L. Wende, O. Doll, R. Zengerle, F. Clement, D. Biro, Dispensing technology on the route to an industrial metallization process, Energy Procedia 67, 138 (2015). https://doi.org/10.1016/j.egypro.2015.03.297 [CrossRef] [Google Scholar]
  19. K. Gensowski, M. Much, E. Bujnoch, S. Spahn, S. Tepner, F. Clement, Filament stretching during micro-extrusion of silver pastes enables an improved fine-line silicon solar cell metallization, Sci. Rep. 12, 12318 (2022). https://doi.org/10.1038/s41598-022-16249-5 [CrossRef] [Google Scholar]
  20. K. Gensowski, M. Much, M. Palme, A.M. Jimenez, E. Bujnoch, K. Muramatsu, S. Tepner, F. Clement, Filament stretching during parallel dispensing − a way to reduce silver consumption in SHJ metallization, Sol. Energy Mater. Sol. Cells 245, 111871 (2022). https://doi.org/10.1016/j.solmat.2022.111871 [CrossRef] [Google Scholar]
  21. M. Pospischil, J. Meda, M. Mosig, N. Heuser, F. Heitmann, S. Molinero, C. Djimegou, M. Weil, E. Milione, I. Lacmago, T. Müller, K. Gensowski, E. Bujnoch, A. Jimenez, S. Pingel, S. Tepner, F. Clement, M. Kuchler, M. Breitenbücher, Fully automated intermittent parallel dispensing, in 10th Metallization and Interconnection Workshop (Genk, Belgium, 2021) [Google Scholar]
  22. J. Buddgård, T. Lagerstedt, A. Machirant, Tape Interconnection for Silicon Solar Cells with Extended Long-Term-Stability (2018), Source: https://jbecotech.se/wordpress/wp-content/uploads/2018/04/Article-Tape-interconnection-fpor-siliconsolar-cells-with-long-term-stability.pdf, [Accessed: 6.01.2024] [Google Scholar]
  23. StickySolarPower, The Tape Solution, 2024. https://www.stickysolarpower.com/the-tape-solution/ (accessed 20 June 2024) [Google Scholar]
  24. J. Buddgård, T. Lagerstedt, A. Machirant, Tape interconnection for silicon solar cells with extended long-term stability, in Proc. of the 33rd Photovoltaic Solar Energy Conference (EUPVSEC) (Amsterdam, Netherlands, 2017) [Google Scholar]
  25. J.R. Davis, Aluminum and Aluminum Alloys, in ASM Specially Handbook (ASM International, 1993) [Google Scholar]
  26. T. Söderström, P. Papet, Y. Yao, J. Ufheil, SmartWire Connection Technology (2014) [Google Scholar]
  27. T. Geipel, U. Eitner, Electrically conductive adhesives: An emerging interconnection technology for high-efficiency solar modules, Photovolt. Int. 21, 27 (2013) [Google Scholar]
  28. T. Geipel, V. Nikitina, L. Pitta Bauermann, E. Fokuhl, E. Schnabel, D. Erath, A. Krieg, A. Kraft, T. Fischer, R. Lorenz, D. Breitenbücher, Industrialization of ribbon interconnection for silicon heterojunction solar cells with electrically conductive adhesives, in Proc. of the 36th Photovoltaic Solar Energy Conference (EUPVSEC) (Marseille, France 2019) [Google Scholar]
  29. H.J. Lewis, F.M. Coughlan, An overview of the use of electrically conductive adhesives (ECAs) as a solder replacement, J. Adhes. Sci. Technol. 22, 801 (2008). https://doi.org/10.1163/156856108X305543 [CrossRef] [Google Scholar]
  30. Fraunhofer ISE, SmartCalc®. https://www.cell-to-module.com/ (accessed 19 January 2024). [Google Scholar]
  31. M. Pospischil, M. Klawitter, M. Kuchler, J. Specht, H. Gentischer, R. Efinger, M. Konig, M. Horteis, C. Mohr, L. Wende, J. Lossen, M. Weiss, O. Doll, I. Kohler, R. Zengerle, F. Clement, D. Biro, Development of a high-throughput fine line metallization process using CFD-simulation, in Conference Records of 39th IEEE Photovoltaic Specialists Conference (PVSC) (Tampa, FL, USA, IEEE, 2013), pp. 2250–2253 [Google Scholar]
  32. R. Mayberry, K. Myers, V. Chandrasekaran, A. Henning, H. Zhao, U.E. Hofmueller, Laser enhanced contact optimization (LECO) and LECO-Specific pastes: a novel technology for improved cell efficiency, in Proc. of the 36th Photovoltaic Solar Energy Conference (EUPVSEC) (Marseille, France, 2019) [Google Scholar]
  33. T. Wenzel, A. Lorenz, E. Lohmüller, S. Auerbach, K. Masuri, Y.C. Lau, S. Tepner, F. Clement, Progress with screen printed metallization of silicon solar cells − towards 20 µm line width and 20 mg silver laydown for PERC front side contacts, Sol. Energy Mater. Sol. Cells 244, 111804 (2022). https://doi.org/10.1016/j.solmat.2022.111804 [CrossRef] [Google Scholar]
  34. G. Yang, B. van de Loo, M. Stodolny, G. Limodio, J. Melskens, B. Macco, P. Bronsveld, O. Isabella, A. Weeber, M. Zeman, W.M.M. Kessels, Passivation enhancement of poly-Si carrier-selective contacts by applying ALD Al2O3 capping layers, IEEE J. Photovolt. 12, 259 (2022). https://doi.org/10.1109/JPHOTOV.2021.3119595 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.