Volume 14, 2023
Special Issue on ‘WCPEC-8: State of the Art and Developments in Photovoltaics’, edited by Alessandra Scognamiglio, Robert Kenny, Shuzi Hayase and Arno Smets
|Number of page(s)||10|
|Section||Modules and Systems|
|Published online||10 February 2023|
Advanced UV-fluorescence image analysis for early detection of PV-power degradation
SAL Silicon Austria Labs, Europastraße 12, 9524 Villach, Austria
2 OFI Austrian Research Institute for Chemistry and Technology, Franz-Grill-Straße 5/Objekt 213, 1030 Vienna, Austria
3 AIT Austrian Institute of Technology GmbH, Giefinggasse 4, 1210 Vienna, Austria
4 University of Applied Sciences Technikum Wien, Höchstädtplatz 6, 1200 Vienna, Austria
* e-mail: firstname.lastname@example.org
Received in final form: 25 November 2022
Accepted: 9 January 2023
Published online: 10 February 2023
Reliability and durability of photovoltaic modules are a key factor for the development of emerging PV markets worldwide. Reliability is directly dependent on the chemical and physical stability of the polymeric encapsulation materials. One method capable of detecting ageing effects of the polymeric encapsulant directly on-site is UltraViolet Fluorescence (UVF) imaging. This work deals with advanced imaging analysis of UVF images and the subsequent correlation to electrical parameters of PV modules, which were exposed to climate-specific, long-term, accelerated aging procedures. For establishing a correlation, a so called UVF area ratio was established, resulting from the typical fluorescence patterns of the encapsulant material, which arise due to stress impact (e.g., water vapor ingress, elevated temperature, irradiation) and aging/degradation processes. Results of the data analysis show a clear correlation of the UVF area ratios and the electrical parameters with increasing aging time. In particular, the relationship between power and series resistance could be confirmed by extensive long-term test series with different climate-specific aging processes. Assuming the same type of polymeric encapsulation and backsheet and a comparable climate, determining the UVF area ratio can be used to estimate the service life and electrical power dissipation of each module installed in a PV array.
Key words: Reliability / imaging / operation / maintenance / non-invasive
© L. Neumaier et al., Published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.