Issue |
EPJ Photovolt.
Volume 10, 2019
|
|
---|---|---|
Article Number | 4 | |
Number of page(s) | 4 | |
Section | Modules and Systems | |
DOI | https://doi.org/10.1051/epjpv/2019003 | |
Published online | 14 June 2019 |
https://doi.org/10.1051/epjpv/2019003
Regular Article
17.2% efficiency CuIn1−xGaxSe2 thin-film based mini-module thanks to alternative architecture yielding 81% fill factor
1
Institut des Matériaux Jean Rouxel (IMN)-UMR 6502, Université de Nantes, CNRS, 2 rue de la Houssinière, BP 32229, 44322 Nantes Cedex 3, France
2
Institut d'Électronique, de Télécommunications Rennes (IETR), UMR 6164, Université de Nantes, CNRS, 2 rue de la Houssinière, BP 32229, 44322 Nantes Cedex 3, France
* e-mail: justine.lorthioir@cnrs-imn.fr
Received:
5
November
2018
Received in final form:
25
March
2019
Accepted:
6
May
2019
Published online: 14 June 2019
An alternative to conventional Cu(In,Ga)Se2 module structure is proposed and experimentally investigated. This alternative module structure, which consists in applying metallic buses to connect monolithically adjacent cells in series, is likely to offer the opportunity of minimizing both optical and electrical losses observed in conventional module structure compared to small area cells. The fabrication process of such alternative modules is presented. The performances achieved are discussed in comparison with a standard small-area-cell elaborated simultaneously. Despite slightly lower output voltage per cell, the alternative module structure demonstrates an efficiency of 17.2% (with 81% fill factor), against 16.4% (with 75% fill factor) for the standard cell. This promising result opens new routes to decrease the gap observed between small-area-cells and industrial modules.
Key words: CIGSe / thin-film solar cells / alternative module structure
© J. Lorthioir et al., published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.