Volume 8, 2017
Topical Issue: Theory and modelling
|Number of page(s)||6|
|Section||Theory and Modelling|
|Published online||24 March 2017|
Modeling of InGaN/Si tandem cells: comparison between 2-contacts/4-contacts
1 GeePs, UMR 8507, CNRS, Centrale Supélec, UPsud, UPMC, 11 Rue Joliot-Curie, 91192 Gif-sur-Yvette Cedex, France
2 Université Pierre et Marie Curie, UPMC, 4 Place Jussieu, 75005 Paris, France
3 Département des Sciences Physiques, UVSQ, 45 Avenue des États-Unis, 78035 Versailles, France
Received: 18 November 2016
Accepted: 26 January 2017
Published online: 24 March 2017
Due to its electrical and optical interesting properties, InGaN alloy is being intensively studied to be combined with silicon in order to achieve low-cost high-efficiency solar cell. However, a relatively thick monophasic layer of InGaN is difficult to grow due to the relaxation issue in material. This issue can be avoided by semibulk structure. In this work, we present an InGaN/Si double-junction solar cell modeled using Silvaco-ATLAS TCAD software. We have taken into account polarization effect in III-N materials. We have shown that 50% of indium is needed to ensure the current matching between the top cell and the bottom cell in 2-terminal configuration. Such high indium composition is technologically challenging to grow. Thus, we have modeled a 4-terminals solar cell with relatively low indium composition (In = 25%) where current matching is not needed. With technologically feasible structural parameters, we have shown that an efficiency near to 30% can be achieved with InGaN/Si 4-contact tandem cell.
© W. El-Huni et al., published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.