Issue
EPJ Photovolt.
Volume 14, 2023
Special Issue on ‘WCPEC-8: State of the Art and Developments in Photovoltaics’, edited by Alessandra Scognamiglio, Robert Kenny, Shuzi Hayase and Arno Smets
Article Number 16
Number of page(s) 13
Section Semiconductor Thin Films
DOI https://doi.org/10.1051/epjpv/2023007
Published online 30 March 2023
  1. M.A. Green, E.D. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, K. Bothe, D. Hinken, M. Rauer, X. Hao, Solar cell efficiency tables (Version 60), Progr. Photovolt.: Res. Appl. 30, 687 (2022) [Google Scholar]
  2. M. Jošt, T. Bertram, D. Koushik, J.A. Marquez, M.A. Verheijen, M.D. Heinemann, E. Köhnen, A. Al-Ashouri, S. Braunger, F. Lang, B. Rech, T. Unold, M. Creatore, I. Lauermann, C.A. Kaufmann, R. Schlatmann, S. Albrecht, 21.6%-efficient monolithic perovskite/Cu(In,Ga)Se2 tandem solar cells with thin conformal hole transport layers for integration on rough bottom cell surfaces, ACS Energy Lett. 4, 583 (2019) [CrossRef] [Google Scholar]
  3. M. Nakamura, C.C. Lin, C. Nishiyama, K. Tada, T. Bessho, H. Segawa, Semi-transparent Perovskite Solar Cells for Four-Terminal Perovskite/CIGS Tandem Solar Cells, ACS Appl. Energy Mater. 5, 8103 (2022) [Google Scholar]
  4. M.A. Ruiz-Preciado, F. Gota, P. Fassl, I.M. Hossain, R. Singh, F. Laufer, F. Schackmar, T. Feeney, A. Farag, I. Allegro, H. Hu, S. Gharibzadeh, B.A. Nejand, V.S. Gevaerts, M. Simor, P.J. Bolt, U.W. Paetzold, Monolithic two-terminal perovskite/CIS tandem solar cells with efficiency approaching 25%, ACS Energy Lett. 7, 2273 (2022) [CrossRef] [Google Scholar]
  5. C. Schultz, G. Farias-Basulto, D. Schmidt, M. Fenske, J. Dagar, A. Bartelt, R. Schlatmann, E. Unger, B. Stegemann, Series interconnection of monolithic 2-terminal CIGSe-perovskite tandem cells: development of a novel interconnection scheme and laser-based patterning processes, in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC) (2021), pp. 2539–2543 [Google Scholar]
  6. C. Schultz, Laser patterning of chalcopyrite and perovskite based solar cells: Investigation of the laser-material interaction and laser-induced damages, PhD thesis, Technische Universität Berlin (2021), pp. 1–246 [Google Scholar]
  7. C. Schultz, A. Bartelt, C. Junghans, W. Becker, R. Schlatmann, B. Stegemann, Enhanced recombination next to laser-patterned lines in CIGSe solar cells revealed by spectral and time-resolved photoluminescence, Appl. Surface Sci. 536, 147721 (2021) [CrossRef] [Google Scholar]
  8. C. Schultz, M. Fenske, J. Dagar, A. Zeiser, A. Bartelt, R. Schlatmann, E.L. Unger, B. Stegemann, Ablation mechanisms of nanosecond and picosecond laser scribing for metal halide perovskite module interconnection − an experimental and numerical analysis, Solar Energy 198, 410 (2020) [Google Scholar]
  9. B. Stegemann, C. Schultz, Laser patterning of thin films, Digital Encyclopedia of Applied Physics (2019), https://doi.org/10.1002/3527600434.eap830 [Google Scholar]
  10. M. Fenske, C. Schultz, J. Dagar, F.U. Kosasih, A. Zeiser, C. Junghans, A. Bartelt, C. Ducati, R. Schlatmann, E.L. Unger, B. Stegemann, Improved electrical performance of perovskite photovoltaic mini-modules through controlled PbI2 formation using nanosecond laser pulses for P3 patterning, Energy Technol. 9, 2000969 (2021) [CrossRef] [Google Scholar]
  11. J. Dagar, G. Paramasivam, C. Klimm, M. Fenske, C. Schultz, R. Schlatmann, B. Stegemann, E. Unger, Stability assessment of p-i-n perovskite photovoltaic mini-modules utilizing different top metal electrodes, Micromachines 12, 423 (2021) [Google Scholar]
  12. S.S. Schmidt, C. Wolf, H. Rodriguez-Alvarez, J.-P. Bäcker, C.A. Kaufmann, S. Merdes, F. Ziem, M. Hartig, S. Cinque, I. Dorbandt, C. Köble, D. Abou-Ras, R. Mainz, R. Schlatmann, Adjusting the Ga grading during fast atmospheric processing of Cu(In,Ga)Se2 solar cell absorber layers using elemental selenium vapor, Progr. Photovolt.: Res. Appl. 25, 341 (2017) [Google Scholar]
  13. J.M. Liu, Simple technique for measurements of pulsed Gaussian-beam spot sizes, Opt. Lett. 7, 196 (1982) [Google Scholar]
  14. P.J. Potts, A Handbook of Silicate Rock Analysis (Chapman and Hall, New York, NY, 1986) [Google Scholar]
  15. B. Stegemann, M. Schüle, C. Schultz, K. Stelmaszczyk, M. Weizman, C. Wolf, C.A. Kaufmann, B. Rau, R. Schlatmann, F. Fink, Electrical and structural functionality of CIGSe solar cells patterned with picosecond laser pulses of different wavelengths, in 2015 IEEE 42nd, IEEE Photovoltaic Specialist Conference (PVSC) (2015), pp. 1–4 [Google Scholar]
  16. C. Schultz, M. Schuele, K. Stelmaszczyk, M. Weizman, O. Gref, F. Friedrich, C. Wolf, N. Papathanasiou, C.A. Kaufmann, B. Rau, Laser-induced local phase transformation of CIGSe for monolithic serial interconnection: analysis of the material properties, Sol. Energy Mater. Sol. Cells 157, 636 (2016) [Google Scholar]
  17. B. Stegemann, M. Schüle, C. Schultz, K. Stelmaszczyk, M. Weizman, C. Wolf, C.A. Kaufmann, B. Rau, R. Schlatmann, F. Fink, Picosecond and nanosecond laser structuring of CIGSe solar cells, in Proc. 6th World Conf. Photovolt. Energy Convers. (2014), pp. 319–320 [Google Scholar]
  18. K. Brecl, M. Topič, F. Smole, A detailed study of monolithic contacts and electrical losses in a large-area thin-film module, Progr. Photovolt.: Res. Appl. 13, 297 (2005) [Google Scholar]
  19. D. Thomas, In situ Spannungs- und Strukturanalyse von Molybdän- und CuInS2-Dünnschichten mittels Röntgendiffraktion, PhD thesis, Technische Universität Berlin, (2012), pp. 1–138 [Google Scholar]
  20. M. Domke, G. Heise, I. Richter, S. Sarrach, H.P. Huber, Pump-probe investigations on the laser ablation of CIS thin film solar cells, Phys. Procedia 12, 396 (2011) [Google Scholar]
  21. G. Heise, M. Englmaier, C. Hellwig, T. Kuznicki, S. Sarrach, H.P. Huber, Laser ablation of thin molybdenum films on transparent substrates at low fluences, Appl. Phys. A 102, 173 (2011) [CrossRef] [Google Scholar]
  22. Y.G. Shen, Effect of deposition conditions on mechanical stresses and microstructure of sputter-deposited molybdenum and reactively sputter-deposited molybdenum nitride films, Mater. Sci. Eng. A 359, 158 (2003) [CrossRef] [Google Scholar]
  23. G. Heise, M. Domke, J. Konrad, S. Sarrach, J. Sotrop, H.P. Huber, Laser lift-off initiated by direct induced ablation of different metal thin films with ultra-short laser pulses, J. Phys. D: Appl. Phys. 45, 315303 (2012) [Google Scholar]
  24. C. Schultz, M. Schüle, K. Stelmaszczyk, J. Bonse, R. Witteck, M. Weizman, H. Rhein, B. Rau, R. Schlatmann, V. Quaschning, Film side laser patterning of molybdenum thin films sputter-deposited onto glass, in 27th European Photovoltaic Solar Energy Conference and Exhibition (2012), pp. 2266–2272 [Google Scholar]
  25. A. Wehrmann, S. Puttnins, L. Hartmann, M. Ehrhardt, P. Lorenz, K. Zimmer, Analysis of laser scribes at CIGS thin-film solar cells by localized electrical and optical measurements, Opt. Laser Technol. 44, 1753 (2012) [Google Scholar]
  26. P.-O. Westin, J.T. Wätjen, U. Zimmermann, M. Edoff, Microanalysis of laser micro-welded interconnections in CIGS PV modules, Sol. Energy Mater. Sol. Cells 98, 172 (2012) [Google Scholar]
  27. P.O. Westin, U. Zimmermann, M. Edoff, Laser patterning of P2 interconnect via in thin-film CIGS PV modules, Sol. Energy Mater. Sol. Cells 92, 1230 (2008) [Google Scholar]
  28. G. Heise, A. Heiss, H. Vogt, H.P. Huber, Ultrafast lasers improve the efficiency of CIS thin film solar cells, Phys. Procedia 39, 702 (2012) [Google Scholar]
  29. C. Schultz, M. Fenske, J. Dagar, G.A. Farias Basulto, A. Zeiser, A. Bartelt, C. Junghans, R. Schlatmann, E. Unger, B. Stegemann, Laser-based series interconnection of chalcopyrite und perovskite solar cells: analysis of material modifications and implications for achieving small dead area widths, Mater. Today: Proc. 53, 299 (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.