Issue |
EPJ Photovolt.
Volume 13, 2022
Special Issue on ‘WCPEC-8: State of the Art and Developments in Photovoltaics’, edited by Alessandra Scognamiglio, Robert Kenny, Shuzi Hayase and Arno Smets
|
|
---|---|---|
Article Number | 28 | |
Number of page(s) | 5 | |
Section | Semiconductor Thin Films | |
DOI | https://doi.org/10.1051/epjpv/2022026 | |
Published online | 08 December 2022 |
https://doi.org/10.1051/epjpv/2022026
Regular Article
Impact of Ag content on device properties of Cu(In,Ga)Se2 solar cells
1
Zentrum für Sonnenenergie und Wasserstoff Forschung, 70563 Stuttgart, Germany
2
Institute for Photovoltaics, University of Stuttgart, 70569 Stuttgart, Germany
* e-mail: ana.kanevce@zsw-bw.de
Received:
30
June
2022
Received in final form:
13
October
2022
Accepted:
15
November
2022
Published online: 8 December 2022
Partial substitution of Cu by Ag in Cu(In,Ga)Se2 (CIGS) solar cells is advantageous as it allows lower temperature growth while maintaining high performance. To understand the role of Ag on device performance, we present a comprehensive analysis of (Ag,Cu)(In,Ga)Se2 (ACIGS) samples with an [Ag]/([Ag]+[Cu]) (AAC) ratio varying from 7% to 22%. The analysis involves a set of material and device characterization techniques as well as numerical simulations. Multiple electrical and material properties show a systematic dependence on the increased Ag content. These include a carrier-density decrease, a grain-size increase, and a flattened [Ga]/([Ga] + [In]) (GGI) profile leading to a higher minimum band gap energy and a reduced back grading. Although the best performing device (PCE = 18.0%) in this set has an AAC = 7%, cells with higher Ag contents have an advantage of a smoother absorber surface which is attractive for tandem applications, despite their slightly inferior conversion efficiencies (PCE = 16.4% for 22% Ag).
Key words: Ag / CIGS solar cells / material characterization / device characterization
© A. Kanevce et al., Published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.